Skype chat, instant message
cnbearing.info
Top Supplier rank is based on hit rate.
Size:
 Designation

Google Search
Google


YI.AN FEI HONG BEARING MANUFACTURING CO LTD


Full ceramic(All-ceramic)       bearing of ZrO2 materia
Full ceramic bearing have excellence performance as special electrical and magnetism resistance, wear and corrosion resistance, lubrication and maintenance free when working,especially high and low- temperature application .etc. could be used in awful environment and specially condition. The rings and balls made by full ceramic material:ZrO2, as a standard constructure,the cage made by PTFE, generally we also could make the cage with GFRPA66-25, PEEK, PI, AISI SUS304, SUS316, Cu, etc.

Full ceramic(All-ceramic)       bearing of Si3N4 material
Full ceramic bearing made with Si3N4 have some better performance than ZrO2, the rings and balls made by full ceramic material:Si3N4, as a standard constructure,the cage made by PTFE, generally we also could make the cage with GFRPA66-25,PEEK,PI, Phenolic Textolite Tube ,etc. Compares than the material of ZrO2 ,The SiN4 ceramics bearings could endure heavier load and could be used in higher temperature environment. Also we could offer precision ceramic bearing which generally used in high-speed and high-rigidity spindle.the manufactured clearance could be P4 TO UP grade.

Full ceramic(All-ceramic)       bearing of full complement balls
Full ceramic bearing of full complement balls has an add-ball gap on its side. Because using no frame design, the bearing able to install more ceramic balls than the standard construction, so the heavier load ability increased more. In addition, to avoid the limited of the frame material, this bearing same as the full ceramic bearing of ceramic cage has corrosion resistance and high temperature application. This series of bearing is not for high -speed choice, it should be to install on the unforced side.

Full ceramic(All-ceramic)       bearing of ceramic cage
Ceramic cage has excellence performance as wear and corrosion resistance, high strength, lubrication and maintenance free when working. Adopting the ceramic cage, Ceramic bearing can be used in the most inclemency environments as corrosive, low temperature, high vacuum. The normal used ceramic materials are ZrO2, Si3N4 or Sic.

Hybrid construction ceramic ball bearing
Ceramic ball especially Si3N4 have the following performance as low density, high strength, low tribology modulus, wear resistance, well rigidity, lubrication and maintenance free when working, it's the best choice for rollers (inner ring and outer ring are made by metal) of the hybrid construction ceramic ball bearing which are used in high-speed, high accuracy and long life environments. Normally, GCr15 or AISI440C makes inner ring and outer ring; the ceramic ball can adopt ZrO2, Si3N4 or Sic.

Plastic Bearings

Precision plastic bearing
Precision plastic bearings,have the more exact rolling accuracy and more strict dimension tolerance. The proper material, which is prone to precision machining, is selected to make the inner ring, outer ring, balls and cage, could be used in precision and high-speed running applications.

Anti-Corrosion Plastic Bearings
Various material such as;POM, PP, PA, PBT, UHMWPE, PTFE,PEEK may be selected for their resistance to chemicals aim at various anti-corrosion application, Such bearings can operate in liquids and contamination sensitive environments even eroded in the most inclemency acid/ alkali/ salt/ impregnant/ oil/ gas/ seawater. Generally materials are fit together as following:

Anti-Acid & Anti-Alkali Bearing
HDPE, PE, UHMWPE are approved can be used in faintish acid and alkali environment. (30% CuCl2 solution and 30% NaOH solution is tested ok). PVDF AND PTFE can be used in strong acid and alkali environment. therein?PTFE can be used in thick acid and alkali environment, including HF oleum and nitric acid.

High Temperature Application Plastic Bearings
PVDF, PTFE (Teflon), PPS, PEEK, PI were approved which are the perfect material for high temperature application plastic bearings. therein , PI can be used at 300? in long-term?short-term   can endure 350?, which is the best one on the known project plastic.

Plastic Inserts & Plastic Pillow Blocks
The plastics insert bearings specially have the performance of corrosion and wear resistance, reduce vibration and anti-bump, be freed from the maintenance and so forth, aim at working in different environment the material of PBT, UHMN, and PTFE can be provided as choice.   

Main ProductsThe Most Competitive Products

Full ceramic(All-ceramic) bearing of ZrO2 materia
Full ceramic bearing have excellence performance as special electrical and magnetism resistance, wear and corrosion resistance, lubrication and maintenance free when working,especially high and low- temperature application .etc. could be used in awful environment and specially condition. The rings and balls made by full ceramic material:ZrO2, as a standard constructure,the cage made by PTFE, generally we also could make the cage with GFRPA66-25, PEEK, PI, AISI SUS304, SUS316, Cu, etc.

Full ceramic(All-ceramic) bearing of Si3N4 material
Full ceramic bearing made with Si3N4 have some better performance than ZrO2, the rings and balls made by full ceramic material:Si3N4, as a standard constructure,the cage made by PTFE, generally we also could make the cage with GFRPA66-25,PEEK,PI, Phenolic Textolite Tube ,etc. Compares than the material of ZrO2 ,The SiN4 ceramics bearings could endure heavier load and could be used in higher temperature environment. Also we could offer precision ceramic bearing which generally used in high-speed and high-rigidity spindle.the manufactured clearance could be P4 TO UP grade.

Full ceramic(All-ceramic) bearing of full complement balls
Full ceramic bearing of full complement balls has an add-ball gap on its side. Because using no frame design, the bearing able to install more ceramic balls than the standard construction, so the heavier load ability increased more. In addition, to avoid the limited of the frame material, this bearing same as the full ceramic bearing of ceramic cage has corrosion resistance and high temperature application. This series of bearing is not for high -speed choice, it should be to install on the unforced side.

Full ceramic(All-ceramic) bearing of ceramic cage
Ceramic cage has excellence performance as wear and corrosion resistance, high strength, lubrication and maintenance free when working. Adopting the ceramic cage, Ceramic bearing can be used in the most inclemency environments as corrosive, low temperature, high vacuum. The normal used ceramic materials are ZrO2, Si3N4 or Sic.

Hybrid construction ceramic ball bearing
Ceramic ball especially Si3N4 have the following performance as low density, high strength, low tribology modulus, wear resistance, well rigidity, lubrication and maintenance free when working, it's the best choice for rollers (inner ring and outer ring are made by metal) of the hybrid construction ceramic ball bearing which are used in high-speed, high accuracy and long life environments. Normally, GCr15 or AISI440C makes inner ring and outer ring; the ceramic ball can adopt ZrO2, Si3N4 or Sic.

Plastic Bearings

Precision plastic bearing
Precision plastic bearings,have the more exact rolling accuracy and more strict dimension tolerance. The proper material, which is prone to precision machining, is selected to make the inner ring, outer ring, balls and cage, could be used in precision and high-speed running applications.

Anti-Corrosion Plastic Bearings
Various material such as;POM, PP, PA, PBT, UHMWPE, PTFE,PEEK may be selected for their resistance to chemicals aim at various anti-corrosion application, Such bearings can operate in liquids and contamination sensitive environments even eroded in the most inclemency acid/ alkali/ salt/ impregnant/ oil/ gas/ seawater. Generally materials are fit together as following:

Anti-Acid & Anti-Alkali Bearing
HDPE, PE, UHMWPE are approved can be used in faintish acid and alkali environment. (30% CuCl2 solution and 30% NaOH solution is tested ok). PVDF AND PTFE can be used in strong acid and alkali environment. therein?PTFE can be used in thick acid and alkali environment, including HF oleum and nitric acid.

High Temperature Application Plastic Bearings
PVDF, PTFE (Teflon), PPS, PEEK, PI were approved which are the perfect material for high temperature application plastic bearings. therein , PI can be used at 300? in long-term?short-term can endure 350?, which is the best one on the known project plastic.

Plastic Inserts & Plastic Pillow Blocks
The plastics insert bearings specially have the performance of corrosion and wear resistance, reduce vibration and anti-bump, be freed from the maintenance and so forth, aim at working in different environment the material of PBT, UHMN, and PTFE can be provided as choice.
Full ceramic(All-ceramic) bearing of ZrO2 materia
Full ceramic bearing have excellence performance as special electrical and magnetism resistance, wear and corrosion resistance, lubrication and maintenance free when working,especially high and low- temperature application .etc. could be used in awful environment and specially condition. The rings and balls made by full ceramic material:ZrO2, as a standard constructure,the cage made by PTFE, generally we also could make the cage with GFRPA66-25, PEEK, PI, AISI SUS304, SUS316, Cu, etc.

Full ceramic(All-ceramic) bearing of Si3N4 material
Full ceramic bearing made with Si3N4 have some better performance than ZrO2, the rings and balls made by full ceramic material:Si3N4, as a standard constructure,the cage made by PTFE, generally we also could make the cage with GFRPA66-25,PEEK,PI, Phenolic Textolite Tube ,etc. Compares than the material of ZrO2 ,The SiN4 ceramics bearings could endure heavier load and could be used in higher temperature environment. Also we could offer precision ceramic bearing which generally used in high-speed and high-rigidity spindle.the manufactured clearance could be P4 TO UP grade.

Full ceramic(All-ceramic) bearing of full complement balls
Full ceramic bearing of full complement balls has an add-ball gap on its side. Because using no frame design, the bearing able to install more ceramic balls than the standard construction, so the heavier load ability increased more. In addition, to avoid the limited of the frame material, this bearing same as the full ceramic bearing of ceramic cage has corrosion resistance and high temperature application. This series of bearing is not for high -speed choice, it should be to install on the unforced side.

Full ceramic(All-ceramic) bearing of ceramic cage
Ceramic cage has excellence performance as wear and corrosion resistance, high strength, lubrication and maintenance free when working. Adopting the ceramic cage, Ceramic bearing can be used in the most inclemency environments as corrosive, low temperature, high vacuum. The normal used ceramic materials are ZrO2, Si3N4 or Sic.

Hybrid construction ceramic ball bearing
Ceramic ball especially Si3N4 have the following performance as low density, high strength, low tribology modulus, wear resistance, well rigidity, lubrication and maintenance free when working, it's the best choice for rollers (inner ring and outer ring are made by metal) of the hybrid construction ceramic ball bearing which are used in high-speed, high accuracy and long life environments. Normally, GCr15 or AISI440C makes inner ring and outer ring; the ceramic ball can adopt ZrO2, Si3N4 or Sic.

Plastic Bearings

Precision plastic bearing
Precision plastic bearings,have the more exact rolling accuracy and more strict dimension tolerance. The proper material, which is prone to precision machining, is selected to make the inner ring, outer ring, balls and cage, could be used in precision and high-speed running applications.

Anti-Corrosion Plastic Bearings
Various material such as;POM, PP, PA, PBT, UHMWPE, PTFE,PEEK may be selected for their resistance to chemicals aim at various anti-corrosion application, Such bearings can operate in liquids and contamination sensitive environments even eroded in the most inclemency acid/ alkali/ salt/ impregnant/ oil/ gas/ seawater. Generally materials are fit together as following:

Anti-Acid & Anti-Alkali Bearing
HDPE, PE, UHMWPE are approved can be used in faintish acid and alkali environment. (30% CuCl2 solution and 30% NaOH solution is tested ok). PVDF AND PTFE can be used in strong acid and alkali environment. therein?PTFE can be used in thick acid and alkali environment, including HF oleum and nitric acid.

High Temperature Application Plastic Bearings
PVDF, PTFE (Teflon), PPS, PEEK, PI were approved which are the perfect material for high temperature application plastic bearings. therein , PI can be used at 300? in long-term?short-term can endure 350?, which is the best one on the known project plastic.

Plastic Inserts & Plastic Pillow Blocks
The plastics insert bearings specially have the performance of corrosion and wear resistance, reduce vibration and anti-bump, be freed from the maintenance and so forth, aim at working in different environment the material of PBT, UHMN, and PTFE can be provided as choice.

Contact Us
Address
HUI;L;L;
Zipcode
161500
Country
China
Province
Heilongjiang
Email

Tel
0452-7025432
Fax
0452-7025432
Member Link
http://www.13473.jzzbearing.net
Contact Name
MR.LIHAICHENG


Business Info
No info!
Fastener Trade Show Suzhou

Buyers Guide

Recommended suppliers
JEIL BEARING INDUSTRY CO., LTD
Mounted Ball bearings and Insert bearings : ( Full range : 201~218, 305~328 ) Silver series bearing...
Longma Luoyang Bearing Co.,Ltd.
LuoyangL ongmaOut sizeBear ingFacto ryproduc tsinclud ing (severaldozenskinds) 1.Largee xtra-lar gesizede e...
Luoyang STON Bearing Co.,Ltd.
Multi-Stage cylindrical roller thrust bearings(Tandem bearings),Slewing bearings,Thrust bearings,Ful...
Luoyang Xinshi Bearing Manufacturing Co., Ltd
As a professional bearing manufacturer in China, LYXS develops and manufactures all kinds of b...
SHANGHAI LITS IMPORT EXPORT CO., LTD.
Deep Groove Ball Bearings, Double Row Angular Contact Ball Bearings, Double Row Ball Bearings, Singl...

Suppliers' Catalogs



Copyright © 2010 Golden Spider Network Co., Ltd.  All rights reserved.
Business Contact / Technical Support:Tel : 86-20-38861363, 38861343 Fax : 86-20-38812687
E-mail:info@jzzbearing.net   Contact us